Magnetic assemblies >> Sandwich Assembly Magnets
Sandwich Assembly Magnets
We specialize in manufacturing magnetic assembly, our sandwich assembly magnets are usually used in mounting displays, signs, mounts, etc. Those sandwich magnets have strong holding force. Magnetic strength can be multiplied by up to 32 times by using steel armatures to concentrate magnetic flux. Such armatures may take the form of backing plates, channels or cups. The maximum increase in power is obtained when magnets are sandwiched between two plates. Custom-sizes sandwich lifting magnets can be produced upon customer request. All round bases and some channels and sandwiches assembly magnets are available. All magnetic assemblies are suitable for industrial use.
| Item Code | Dimensions (mm) | Lift Strength (N) | ||
| L | W | H | ||
| YXS01-001 | 27.0 | 21.5 | 8.0 | 45 |
| YXS01-002 | 27.0 | 21.5 | 8.0 | 72 |
| YXS01-003 | 27.0 | 21.5 | 14.3 | 90 |
| YXS01-004 | 53.2 | 21.5 | 8.0 | 100 |
| YXS01-005 | 77.7 | 21.5 | 8.0 | 100 |
| YXS01-006 | 54.0 | 15.9 | 27.0 | 226 |
| YXS01-007 | 54.0 | 15.9 | 25.4 | 226 |
| Item Code | Dimensions (mm) | Magnet | Material | ||
| L | W | H | |||
| YXS02-001 | 25.0 | 22.5 | 3.0 | F25×20.5×6 | Ferrite&Fe |
| YXS02-002 | 35.0 | 30.0 | 4.0 | F34×29×12 | Ferrite&Fe |
| YXS02-003 | 10.3 | 6.3 | 1.5 | F5×5×1.5 | NdFeB&Fe |
| YXS02-004 | 10.0 | 6.0 | 1.5 | F10×5×1.5 | NdFeB&Fe |
| Item Code | Dimensions (mm) | Magnet | Material | |||
| L | A | W | H | |||
| YXS03-001 | 25.0 | 2.5 | 22.5 | 3.0 | F25×20.5×6 | Ferrite&Fe |
| YXS03-002 | 35.0 | 3.0 | 30.0 | 4.0 | F34×29×12 | Ferrite&Fe |
| YXS03-003 | 44.0 | 3.0 | 26.0 | 5.0 | F42×25×17.6 | Ferrite&Fe |
| YXS03-004 | 45.0 | 3.0 | 30.0 | 3.0 | F45×27×8 | Ferrite&Fe |
| YXS03-005 | 50.0 | 3.5 | 30.0 | 4.0 | F48×22×10 | Ferrite&Fe |
| Item Code | Dimensions (mm) | Material | ||||
| L | W | A | B | H | ||
| YXS04-001 | 66.0 | 70.0 | 50.0 | 20.0 | 20.0 | Alnico&Fe |
| YXS04-002 | 111.0 | 104.0 | 52.0 | 25.0 | 50.0 | Alnico&Fe |
| YXS04-003 | 130.0 | 80.0 | 50.0 | 30.0 | 30.0 | Alnico&Fe |
| YXS04-004 | 130.0 | 80.0 | 60.0 | 20.0 | 30.0 | Alnico&Fe |
| Item Code | Yoke | Magnet | Coating | ||
| A | B | C | |||
| YXPY05-01 | 23.5 | 25.5 | 6.9 | Ferrite | Zn |
| YXPY05-01A | 23 | 25.5 | 6.9 | Ferrite | Zn |
| YXPY05-03 | 17 | 20 | 5.2 | Ferrite | Zn |
| YXPY05-04 | 22.5 | 25.5 | 6 | Ferrite | Zn |
| YXPY05-06 | 23 | 28.7 | 7 | Ferrite | Ni |
| YXPY05-18 | 25.8 | 24 | 6.6 | Ferrite | Zn |
| YXPY05-20A | 41.5 | 63.5 | 19.5 | NdFeB | Zn |
| YXPY05-26 | 12.28 | 25 | 5 | Ferrite | Zn |
| YXPY05-48 | 23.3 | 29.5 | 6.5 | Ferrite | Zn |
| YXPY05-49 | 50.8 | 50.8 | 12.7 | Ferrite | Cr |
| Item Code | Magnet Pole | Magnet | |||
| Size | Coating | Size | Material | Coating | |
| YXPV02-01 | F50×30×4 | Glue paint | F48×22×10 | Ferrite | |
| YXPV02-02 | F44×26×5 | Zn | F42×25×17.6 | Ferrite | |
| YXPV02-03 | F16×13.3×1.2 | Zn | F16.5×9.5×5 | Ferrite | |
| YXPV02-04 | F45×30×3 | Zn | F45×27×8 | Ferrite | |
| YXPV02-05 | F25×22.5×3 | Zn | F25×20.5×6 | Ferrite | |
| YXPV02-05A | F25×22.5×3 | Zn | F25×20.5×6 | Ferrite | |
| YXPV02-06 | F35×30×4 | Zn | F34×29×12 | Ferrite | |
| YXPV02-06A | F35×30×4 | Zn | F34×29×12 | Ferrite | |
| YXPV02-07 | F10.3×6.3×1.5 | Zn | F5×5×1.5 | NdFeB | Ni |
| YXPV02-08 | F10×6×1.5 | Zn | F10×5×1.5 | NdFeB | Zn |
| YXPV02-09 | F60×6×6 | Zn | φ12×3 | NdFeB | Zn |
| YXPV02-10 | F50×6×6 | Zn | φ10×4 | NdFeB | Zn |
| YXPV02-11 | F41.5×11×1 | Zn | φ8×2 | NdFeB | Ni |
| YXPV02-12 | F130×13×(1~1.5) | Zn | F43×12×6 | Ferrite | |
Note: All our sandwich holding magnets can be manufactured as per customer's own design
Magnetic Materials Ind. Co.,Ltd. All Rights Reserved.